Zoom image

WatchGuard Access Point AP125

Great Wi-Fi security comes in affordable, small packages. The AP125 from WatchGuard is exactly what you’ve been looking for – a small and affordable indoor access point that comes equipped with 2x2 802.11ac Wave 2 Multi-User MIMO (MU-MIMO). This access point also offers dual concurrent 5 GHz and 2.4 GHz band radios, and data rates of up to 867 Mbps and 300 Mbps, respectively. Common use cases include lower-density environments such as small schools, distributed remote offices, and small meeting rooms.

Performance Without Compromise
By incorporating the latest 802.11ac Wave 2 standards, you’ll have speeds of up to 867 Mbps over the air, without sacrificing security. With MU-MIMO, you get faster user experience, serving multiple devices (smartphones, tablets, laptops) at the same time, so more clients can utilize the network more efficiently.

 

Features & Benefits

  • Wave 2 chipset offers the latest MU-MIMO technology to provide optimal airtime efficiency
  • Measuring under 6 inches (148mm) square, this small access point packs a real punch
  • AP125 takes less than two minutes to activate and configure after connecting to the Wi-Fi Cloud
  • Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design
  • Smart steering automatically pushes clients with low speeds to a closer access point*
  • Band steering manages spectrum efficiency, pushing clients to 5 GHz channels for optimal throughput
  • AP125 continues to scan for wire-less threats and enforces security policy even if the connection with the Wi-Fi Cloud is interrupted*
    *Must have Wi-Fi Cloud enabled with Secure Wi-Fi or Total Wi-Fi license.

 

  • $349.99
  • Support Bundle
Qty:  
  • SKU
    WGA15701
Physical Specifications
Property Specification
Physical Dimensions 148mm X 148mm X 33mm
Weight 237g (0.522 lb)
Operating Temperature 0° - 45°C (32° - 113°F)
Storage Temperature -20° - 65°C (-4° - 149°F)
Humidity 5% to 95% non-condensing
Processor RAM Qualcomm IPQ4028 717 MHz quad-core ARM processor with 256 MB RAM and 64 MB Flash.

 

Port Description Connector Type Speed/Protocol
Power 12V DC/802.3af (PoE) 5.5MM overall diameter/2.1mm center pin/hole N/A
Reset Reset to factory default settings Pin hole push button Hold down and power cycle the device to reset
LAN1 Gigabit Ethernet port that can be used for wired extension for an SSID RJ-45 10/100/1000 Mbps Gigabit Ethernet
LAN2/PoE Gigabit Ethernet port used to connect to the wired LAN and communicate with the WatchGuard Wi-Fi Cloud. This port can also be used to power the device using the 802.3af (PoE) standard. RJ-45 10/100/1000 Mbps Gigabit Ethernet 802.3af Class 0 PoEPoE input voltage: 48V

 

Operational Specifications

Input Power 12V DC/1.5A (5.5mm overall diameter/2.1 center pin/hole)/802.3af (PoE)
Number of Radios 2 radios; One 2.4GHz and 5GHz radio each for simultaneous dual band client access.
Max Clients Supported 512 clients per radio *dependent upon cases
MIMO 2x2 for 2.4/5GHz Radios
Number of Spatial Streams 2 for 2.4/5GHz Radios
RF Transmit Power 20 dBm per radio chain (max); Actual power for Tx will depend on Country Regulatory Doman
Simultaneous MU-MIMO Clients Two 1x1 MU-MIMO clients
Users in a MU-MIMO group with a 2x2 client 1
Bandwidth Agility Yes
Frequency Bands 2.4-2.4835 GHz, 4.9-5.0GHz, 5.15-5.25 GHz; (UNII-1), 5.25-5.35 GHz, 5.47-5.6 GHz,5.650-5.725 GHz (UNII-2), 5.725-5.85 GHz (UNII-3)
Dynamic Frequency Selection Supported in compliance to all latest amendments from FCC, CE, IC, CB, TELEC, KCCregarding certifications.
  • Support Bundle
    1 Year Basic WiFi, 3 Year Basic WiFi
Customer reviews
Average rating:

Score: 3.00. Votes: 1
Rating of votes (1)
5
 
 
0 customers
4
 
 
0 customers
3
 
1 customers
2
 
 
0 customers
1
 
 
0 customers
 
There are no reviews for this product yet